Dishwasher-proof labels and Oatmeal Stout.

posted on April 5, 2009 in Brewing Photos, Currently Brewing, Home Brew Tech

I know most of you who home brew have some sort method to label your bottles. I’ve been using plan old masking tap and a sharpie to mark whats in each bottle. I didn’t like the “prohibition” feel that this method gave but I wasn’t exactly thrilled about printing out labels and then soaking them off once the beer had been enjoyed. I decided that a good compromise would be a permanent generic “Jensen Haus” label and the masking tape labels to note what and from when was in the bottles. I found these labels online and they are billed as “permanent”, dishwasher safe and laser printable. I order up a package and found that they print very well in the laser printer and that they are incredibly sticky and that the laser printing does not rub off. Even with a wet finger. I applied these labels to a case of 1L swing-top brown bottles last night. I ran them through the dishwasher this afternoon so I could bottle my batch of Oatmeal Stout and they survived the dishwasher excellently. In fact, during the stout bottling, I overfilled a couple of bottles and the spilled stout wiped right off the labels. So after a successful trial run, I then applied these labels to all my bottles. (they don’t work on the Growlers.) I took some pics and you can check them out on Flickr. (they should be the in “beer/brewing” photostream in the upper right.)

The Oatmeal Stout not only smelled fantastic, it tasted fantastic as well. Can’t see through it and it has a nice roastedness to it as a good hearty stout should. I hope I can hold out two weeks for this batch to carbonate.

British Tuesday Night

posted on March 24, 2009 in Brewing Photos, Currently Brewing


When I got home from work tonight, I noticed the Hard Cider had pretty much stopped bubbling and that the Krausen in Oatmeal Stout had fallen. So it was Rackin’ Tuesday at Jensen Haus. (after some damn juicy burgers for dinner)

The Oatmeal Stout was pretty mundane. No issues in the racking. I tasted a sample and it tasted as expected. Nice coffee bite and very smooth. Oh how I hope this turns out this time. This batch was the first time I’ve ever used a carboy as a primary fermenter. Looking over in the kitchen, I dread the cleaning this carboy will need.

Now for the interesting part of the night. I transferred the Cider from the Primary bucket to a carboy through the spigot and took a sample glass. (I really liked transfering via the spigot as opposed to the racking cane.) Other than the previously noted Sulfur aroma, it smelled just like Woodchuck Hard Cider. In the carboy, it looked like five gallons of apple juice. (Jessica said it looked like urine. She has an amazing knack for things like that). After I transferred the cider, I popped the lid of the fermenter and discovered one of the most amazing things I’ve ever seen in the Home Brewing process. In the absence of the usual hop and trub in the bottom of the fermenter, the bottom of the Cider fermenter was just yeast. It looked like a combination of honeycomb and a close up view of a Tempurpedic memory foam mattress. Check out this close up photo I took.

Midnight Stout

posted on March 22, 2009 in Brewing Photos, Currently Brewing

After a fine meal of Spaghetti, Craig and JB joined me in brewing a batch of Oatmeal Stout on Saturday. I’m hoping to redeem myself after my last stout was a major disaster. I made two major alterations to my modus operandi for this batch. First, to try and weed out a “house” flavor of bitterness that I noticed in both the Pumpkin Ale and the Copper Ale, I decided to use bottled Spring Water instead of tap water. Besides being neutral and avoiding Chlorine and Fluoride, it also helps avoid any issues with water volume. If you buy 5 gallons of water, its kinda hard to use to much or too little and end up with a wicked powerful batch or a watery batch. Secondly, I made it a point to strain out the hop particles from the boil before the wort went in to the fermenter. I think that’s the major cause of noticeable bitter finish to the Pumpkin Ale and the Copper Ale. I don’t think the Spring Water was a major necessity as the water here in Sioux Falls is pretty decent. However, I strive to control the variables I have direct control over so it makes sense.

This Oatmeal Stout kit from Midwest is really simple. There are no Aroma Hop additions so its a straight forward boil. The Specialty Grains in this kit smell fantastic when they steep. The picture attached to this post is of the Stout in the fermenter. (the fermenter in the background is the Cider Test Batch.) It started bubblin’ inside of 24 hours. I love it when a batch starts fermenting that fast. First of all, if the yeast I add take control right away, the possibility of contamination is minimized. Secondly, its reassuring because it means the yeast were healthy and went to town right away.

Jessica’s Irish Ale Update

The Irish Red has been officially bottled. I tasted it and it seems to be quite good. The time in the Secondary must have been good because this batch is REALLY clear. I’m going to assume a fair amount of chill haze but that always clears after a bit of lagering. I’m hoping this batch is excellent because this is Jessica’s batch. She was responsible for almost the entire batch. If this Irish Red turns out, I think I’ll make the Copper Ale and the Irish Red my standard “house” batches.

Copper Ale Unleashed

posted on February 20, 2009 in Brewing Photos, Currently Brewing

Copper Ale Officially opened a bottle of the Copper Ale tonight. I had strategically put a single bottle in the fridge before I left for work yesterday so I could let it chill all day. Other than the inevitable chill haze, this stuff is awesome. I’m struggling to find a good comparison in a commercial brew but it reminds me of Sam Adams Winter Ale but not as dark. The closest comparison I’ve thought of would be an Oktoberfest. As the single bottle was successful, I put the whole batch in the fridge to halt the priming.  It should have close to 36hrs to settle the yeast and chill haze out. This should be an excellent drinking this stuff while waiting in line for Bockfest on Saturday morning. Hopefully I can keep myself from drinking all of it before I got to visit my parents in March. That’s the best part of Home Brewing. When you have a successful batch and you can share it with other people and get to say, “I made this.” Check out my Flickr Gallery of the Copper Ale here.